Home Improvements
Babyproofing from San Francisco to San Jose
Babyproofing installation is billed by the hour, and a typical home takes two to three hours. We install the safety hardware you've chosen — or recommends what to buy — and anchors every dresser, bookcase, and TV to the wall, for families from San Francisco to San Jose.
- Minimum
- 1 hour
- Typical single job
- 1 hour
- Bay Area typical price
- $250–600
- Hours
- Mon–Sun 8–8
What's included
- Furniture and TV anti-tip anchoring into studs or rated anchors
- Hardware-mounted stair gates at the top and bottom of stairs
- Cabinet and drawer locks, magnetic and latch styles
- Outlet covers and sliding outlet plates
- Corner and edge guards on tables and hearths
- Window stops, blind cord safety, and door pinch guards
What's referred out
- Pool fencing and alarms
- Pressure gates at the top of stairs (hardware-mounted only)
- Electrical work beyond outlet plates
If a job turns out to need a licensed trade or a permit, you'll hear that at the door — not after the hour has started.
Typical jobs and time
Time ranges are what these jobs usually take; you're billed for the actual hours worked, and the price is confirmed before work starts. See pricing.
| Job | Typical time |
|---|---|
| Anchor four pieces of furniture and a TV | 1 hour |
| Two hardware-mounted stair gates | 1–1.5 hours |
| Kitchen cabinets and drawers, full set of locks | 1–1.5 hours |
| Whole-home babyproofing, two bedrooms plus living areas | 2–3 hours |
How it goes
Walk the home at child height
Each room is checked for tip-over risks, reachable cabinets, cords, sharp corners, and stair access.
Confirm the hardware
Products you've bought are checked for fit; anything missing is listed so you can order it.
Anchor and install
Furniture anchors go into studs, gates are mounted into framing, and locks are set so they actually work for adults.
Test everything
Every latch, gate, and anchor is tested before the visit ends.
Babyproofing in Bay Area homes
Furniture anchoring is the single most requested item across the corridor, and Peninsula walls make it a real job: plaster in San Francisco and Burlingame, thin paneling in Eichler homes in Palo Alto and Sunnyvale, and stucco on some interior walls. Anchors are matched to the wall so the strap holds.
Older San Francisco flats and hillside homes in Daly City and San Bruno have steep interior stairs, so hardware-mounted gates at both ends are a common first call.
Related services
Babyproofing: questions people ask
How much does babyproofing installation cost?
Billed by the hour. Most homes take two to three hours for anchoring, gates, locks, and covers, so $150–225 in labor.
Do you supply the babyproofing products?
You buy the products (a list is provided after a quick walkthrough if you want one), and installation is charged hourly.
Can you anchor furniture to plaster walls?
Yes. Plaster and paneled walls get anchors rated for them, or the strap is run into a stud.
Do you install gates on stairs?
Yes, hardware-mounted gates at the top and bottom. Pressure gates aren't used at the top of stairs.
What about cabinets I don't want to drill?
Adhesive and magnetic locks work for most cabinets; drilling is used only where you approve it.
Babyproofing across the corridor
Available in all 14 cities. City pages cover the local housing and what comes up most there.
Request a quote for babyproofing
Reply within 24 hours. Same-day requests are fastest by phone: (628) 277-4131.